An informative introduction to the uses of epoxy in the construction of stitch-and-glue boats.

Instructions for painting with one-part polyurethane paint.

CLC shop tip describing their technique for painting so that the paint covers the hull and comes up on the deck by an inch or so. This looks sharp and is easy to do.

This article describes how to create a veneer inlay for your boat.

A brief description on how to add images to your wood deck.

This article on Ted Henry's pretty site details his approach to magnetic hatch installation.

Nice approach to securing flush mounted hatch covers that stay water tight. Ocean-kayak has written a nice article on this approach using clear instructions and illustrations.

I am thinking of using this approach on my kayak, but will probably add a little more support structure to the underside of the hatch. This design puts all the downward force in the dead-center of the hatch.

Ross Leidy has thoroughly documented how he creates a super clean flush mount hatch cover using bungee cords inside the hatch compartment.

Interlux has put together a several articles for painting and maintaining your boat.

Mike has come up with a great way to clip your wires flush with the hull. Follow his instructions to make yourself a set of boat builders pliers. It will save you time and frustration.