Bulkhead problem
Submitted by mcamp on Sun, 10/31/2004 - 01:01.
Installing the Deck
Building John's Sharpie. Sheer
clamps are installed, now planing down the sheers. Top edge of forward bulkhead is 1/4 inch too low where it meets the sheer, is that amount shy of being flush with the sheer. What to do?
clamps are installed, now planing down the sheers. Top edge of forward bulkhead is 1/4 inch too low where it meets the sheer, is that amount shy of being flush with the sheer. What to do?